更新

ES/单节点/安装es.conf

@@ -0,0 +1,143 @@
+# 前置 & 准备工作
+sudo dnf update -y
+sudo dnf install -y nano wget curl unzip
+
+# 安全组防火墙开放9200端口、5601端口
+
+# 安装 Elasticsearch 9.2.2
+# 导入官方 GPG key
+sudo rpm --import https://artifacts.elastic.co/GPG-KEY-elasticsearch
+
+# 新建 yum repo 文件
+sudo tee /etc/yum.repos.d/elasticsearch.repo <<-'EOF'
+[elasticsearch]
+name=Elasticsearch repository for 9.x packages
+baseurl=https://artifacts.elastic.co/packages/9.x/yum
+gpgcheck=1
+gpgkey=https://artifacts.elastic.co/GPG-KEY-elasticsearch
+enabled=1
+autorefresh=1
+type=rpm-md
+EOF
+
+# 安装 Elasticsearch：
+sudo dnf install elasticsearch --enablerepo=elasticsearch
+
+# 先不管直接启动、报错再查看日志，有可能是权限问题
+sudo systemctl daemon-reload
+sudo systemctl enable elasticsearch
+sudo systemctl start elasticsearch
+sudo systemctl status elasticsearch
+sudo journalctl -u elasticsearch -f
+
+# 手动创建日志目录 + 设置权限
+sudo mkdir -p /usr/share/elasticsearch/logs
+sudo chown -R elasticsearch:elasticsearch /usr/share/elasticsearch/logs
+sudo chmod 750 /usr/share/elasticsearch/logs
+
+# 设置 elastic 超级用户密码 (推荐立即设定)：
+sudo /usr/share/elasticsearch/bin/elasticsearch-reset-password -u elastic
+
+# 查看自签名证书，有则正常
+ll /etc/elasticsearch/certs/
+
+# 查看 HTTP CA 证书指纹（用于其他客户端配置）
+sudo openssl x509 -fingerprint -sha256 -in /etc/elasticsearch/certs/http_ca.crt -noout
+
+# 设置环境变量（替换为你的实际密码）
+export ELASTIC_PASSWORD='MyElastic123!'
+# 测试 HTTPS 请求（必须用 --cacert，因启用了 TLS）
+curl --cacert /etc/elasticsearch/certs/http_ca.crt \
+     -u elastic:$ELASTIC_PASSWORD \
+     https://localhost:9200
+
+
+# 查看默认的配置文件
+grep -v '^\s*#\|^\s*$'   /etc/elasticsearch/elasticsearch.yml
+# 按实际情况修改配置文件集群名、非本地访问等
+cluster.name: my-test-es
+path.data: /var/lib/elasticsearch
+path.logs: /var/log/elasticsearch
+network.host: 0.0.0.0
+xpack.security.enabled: true
+xpack.security.enrollment.enabled: true
+xpack.security.http.ssl:
+  enabled: true
+  keystore.path: certs/http.p12
+xpack.security.transport.ssl:
+  enabled: true
+  verification_mode: certificate
+  keystore.path: certs/transport.p12
+  truststore.path: certs/transport.p12
+cluster.initial_master_nodes: ["weblessie-server-02"]
+http.host: 0.0.0.0
+
+
+# 更改es的jvm大小
+vim  /etc/elasticsearch/jvm.options
+-Xms4g
+-Xmx4g
+
+# 重启
+sudo systemctl restart elasticsearch
+
+# 准备token，后续在Kibana中使用
+sudo /usr/share/elasticsearch/bin/elasticsearch-create-enrollment-token -s kibana
+
+
+# 准备安装 Kibana 9.2.2
+# 新建 repo /etc/yum.repos.d/kibana.repo
+sudo tee /etc/yum.repos.d/kibana.repo <<-'EOF'
+[kibana]
+name=Kibana repository for 9.x packages
+baseurl=https://artifacts.elastic.co/packages/9.x/yum
+gpgcheck=1
+gpgkey=https://artifacts.elastic.co/GPG-KEY-elasticsearch
+enabled=1
+autorefresh=1
+type=rpm-md
+EOF
+
+# 安装 Kibana：
+sudo dnf install kibana --enablerepo=kibana
+# 启动
+sudo systemctl daemon-reload
+sudo systemctl enable --now kibana
+
+# 访问 Kibana，输入生成的token
+http://ip:5601
+
+# 获取 “verification code”
+/usr/share/kibana/bin/kibana-verification-code
+
+# 使用官方工具生成加密密钥（最规范）
+sudo /usr/share/kibana/bin/kibana-encryption-keys generate --force
+# 输出应类似：
+# ✔ Encryption keys generated and written to /etc/kibana/kibana.yml:
+#     xpack.encryptedSavedObjects.encryptionKey
+#     xpack.reporting.encryptionKey
+#     xpack.security.encryptionKey
+
+# 修改配置文件
+grep -v '^\s*#\|^\s*$'   /etc/kibana/kibana.yml
+server.host: "0.0.0.0"
+logging:
+  appenders:
+    file:
+      type: file
+      fileName: /var/log/kibana/kibana.log
+      layout:
+        type: json
+  root:
+    appenders:
+      - default
+      - file
+pid.file: /run/kibana/kibana.pid
+i18n.locale: "zh-CN"
+elasticsearch.hosts: [https://10.0.0.38:9200]
+elasticsearch.serviceAccountToken: AAEAAWVsYXN0aWMva2liYW5hL2Vucm9sbC1wcm9jZXNzLXRva2VuLTE3NjUzNDE4OTI3MjY6Um9KdUo2N1hSZVNPeGNzOXFDaUh2dw
+elasticsearch.ssl.certificateAuthorities: [/var/lib/kibana/ca_1765341893683.crt]
+xpack.fleet.outputs: [{id: fleet-default-output, name: default, is_default: true, is_default_monitoring: true, type: elasticsearch, hosts: [https://10.0.0.38:9200], ca_trusted_fingerprint: 80af64db043e12ebda11c10f70042af91306a705fdcb6285814a84b420c734a5}]
+xpack.encryptedSavedObjects.encryptionKey: f10166c761265d5ca61e7fa2c1acac73
+xpack.reporting.encryptionKey: 1772a5152522675d5a38470e905b2817
+xpack.security.encryptionKey: d4b30e82e47f530a998e29cb0b8e5295

ES/单节点/证书使用示例.conf

@@ -0,0 +1,41 @@
+
+# 获取ES 的证书指纹
+sudo openssl x509 -fingerprint -sha256 -in /etc/elasticsearch/certs/http_ca.crt -noout
+sha256 Fingerprint=80:AF:64:DB:04:3E:12:EB:DA:11:C1:0F:70:04:2A:F9:13:06:A7:05:FD:CB:62:85:81:4A:84:B4:20:C7:34:A5
+
+# kibana web创建的用户
+admin
+G7ZSKFM4AQwHQpwA
+
+
+
+# Filebeat 
+output.elasticsearch:
+  hosts: ["https://49.51.33.153:9200"]
+  username: "elastic"
+  password: "-0NiIBOJGn2CATuPWzNc"
+
+  # 用指纹验证（代替证书文件）
+  ssl.verification_mode: "certificate"
+  ssl.certificate_authorities: []   # 留空（不校验完整链）
+  ssl.supported_protocols: [TLSv1.2, TLSv1.3]
+
+  # 关键：指定 CA 指纹（必须全大写，无 0x，带冒号）
+  ssl.ca_trusted_fingerprint: "80AF64DB043E12EBDA11C10F70042AF91306A705FD2CB6285814A84B420C734A5"
+
+
+
+
+
+# python
+from elasticsearch import Elasticsearch
+
+es = Elasticsearch(
+    hosts=["https://49.51.33.153:9200"],
+    basic_auth=("elastic", "-0NiIBOJGn2CATuPWzNc"),
+    # 指纹必须去掉冒号，全大写
+    ssl_assert_fingerprint="80AF64DB043E12EBDA11C10F70042AF91306A705FD2CB6285814A84B420C734A5",
+    verify_certs=True  # 必须为 True
+)
+
+print(es.info())

filebast/sit/filebeat.yml

@@ -42,7 +42,7 @@ processors:
       when:
         equals:
           log_type: agent.log
-      tokenizer: '%{timestamp} %{level} - [%{method},%{line}] - %{message}'
+      tokenizer: '%{timestamp} [%{thread}] %{level} %{class} - [%{method},%{line}] - %{message}'
       field: "message"
       target_prefix: "mylog"
       ignore_missing: true

filebast/us-prod-01/filebeat.yml

@@ -18,11 +18,11 @@ processors:
       when:
         equals:
           log_type: admin.log 
-      tokenizer: '%{timestamp} [%{thread}] %{log_level} %{log_message}'
+      tokenizer: '%{timestamp}  %{level}  %{pid}  ---  [%{thread}]  %{class}  :  [%{app_name->}]  %{message}'
       field: "message"
-      target_prefix: "parsed_sys_info"
+      target_prefix: "mylog"
       ignore_missing: true
-      overwrite_keys: false
+      overwrite_keys: true
 
 
 

filebast/us-prod-01/flymoon-admin.yml

@@ -2,14 +2,14 @@
   id: us_pord_01_flymoon-admin
   enabled: true
   paths:
-    - /root/logs/flymoon-admin/sys-info.log
+    - /root/logs/flymoon-admin/app.log
   fields:
     application: flymoon-admin  # 自定义字段，标识应用名称
     log_type: admin.log  # 自定义字段，标识日志类型
     environment: us-pord    # 自定义字段，标识机器环境名称
     instance: us-prod-01  # 自定义字段，标识机器名称
   fields_under_root: true
-  multiline.pattern: '^\d{2}:\d{2}:\d{2}\.\d{3}' # 针对info的日志格式
+  multiline.pattern: '^\d{4}-\d{2}-\d{2}-\d{2}:\d{2}:\d{2}\.\d{3}'
   multiline.negate: true
   multiline.match: after
   ignore_older: 24h   # 忽略旧日志文件（避免处理已归档的日志）

filebast/us-prod-02/filebeat.yml

@@ -27,7 +27,7 @@ processors:
       when:
         equals:
           log_type: email.log
-      tokenizer: '%{timestamp} [%{thread}] %{level} %{class} - [%{method_line}] - %{message}'
+      tokenizer: '%{timestamp} %{level} %{pid} --- \\[%{thread}\\] %{message}'
       field: "message"
       target_prefix: "mylog"
       ignore_missing: true
@@ -37,7 +37,7 @@ processors:
       when:
         equals:
           log_type: agent.log
-      tokenizer: '%{timestamp} %{level} - [%{method},%{line}] - %{message}'
+      tokenizer: '%{timestamp}  %{level}  %{pid}  ---  [%{thread}]  %{class}  :  [%{app_name->}]  %{message}'
       field: "message"
       target_prefix: "mylog"
       ignore_missing: true
@@ -45,6 +45,7 @@ processors:
 
 
 
+
 #输出
 output.elasticsearch:
   hosts: ["http://106.53.194.199:9200"]

filebast/us-prod-02/flymoon-agent.yml

@@ -9,7 +9,7 @@
     environment: us-pord    # 自定义字段，标识机器环境名称
     instance: us-prod-02  # 自定义字段，标识机器名称
   fields_under_root: true
-  multiline.pattern: '^\d{2}:\d{2}:\d{2}\.\d{3}' # 针对email的sys-info.log的日志格式多行
+  multiline.pattern: '^\d{4}-\d{2}-\d{2}-\d{2}:\d{2}:\d{2}\.\d{3}'
   multiline.negate: true
   multiline.match: after
   ignore_older: 24h   # 忽略旧日志文件（避免处理已归档的日志）

filebast/us-prod-02/flymoon-email.yml

@@ -20,4 +20,3 @@
   start_position: beginning   # 从文件的开头读取
  
 
- 

filebast/us-prod-03/filebeat.yml

@@ -25,18 +25,20 @@ processors:
   - dissect:
       when:
         equals:
-          log_type: payment.log
+          log_type: agent.log
-      tokenizer: '%{timestamp} [%{thread}] %{level} %{class} - [%{method},%{line}] - %{message}'
+      tokenizer: '%{timestamp}  %{level}  %{pid}  ---  [%{thread}]  %{class}  :  [%{app_name->}]  %{message}'
       field: "message"
       target_prefix: "mylog"
       ignore_missing: true
       overwrite_keys: true
 
+
+
   - dissect:
       when:
         equals:
-          log_type: agent.log
+          log_type: payment.log
-      tokenizer: '%{timestamp} %{level} - [%{method},%{line}] - %{message}'
+      tokenizer: '%{timestamp}  %{level}  %{pid}  ---  [%{thread}]  %{class}  :  [%{app_name->}]  %{message}'
       field: "message"
       target_prefix: "mylog"
       ignore_missing: true
@@ -44,6 +46,7 @@ processors:
 
 
 
+
 #输出
 output.elasticsearch:
   hosts: ["http://106.53.194.199:9200"]

filebast/us-prod-03/flymoon-agent.yml

@@ -9,7 +9,7 @@
     environment: us-pord    # 自定义字段，标识机器环境名称
     instance: us-prod-03  # 自定义字段，标识机器名称
   fields_under_root: true
-  multiline.pattern: '^\d{2}:\d{2}:\d{2}\.\d{3}' # 针对email的sys-info.log的日志格式多行
+  multiline.pattern: '^\d{4}-\d{2}-\d{2}-\d{2}:\d{2}:\d{2}\.\d{3}'
   multiline.negate: true
   multiline.match: after
   ignore_older: 24h   # 忽略旧日志文件（避免处理已归档的日志）

filebast/us-prod-03/flymoon-payment.yml

@@ -2,14 +2,14 @@
   id: us_pord_03_flymoon-payment
   enabled: true
   paths:
-    - /root/logs/flymoon-payment/sys-info.log
+    - /root/logs/flymoon-payment/app.log
   fields:
     application: flymoon-payment
     log_type: payment.log
     environment: us-pord
     instance: us-prod-03
   fields_under_root: true
-  multiline.pattern: '^\d{2}:\d{2}:\d{2}\.\d{3}'
+  multiline.pattern: '^\d{4}-\d{2}-\d{2}-\d{2}:\d{2}:\d{2}\.\d{3}'
   multiline.negate: true
   multiline.match: after
   ignore_older: 24h   # 忽略旧日志文件（避免处理已归档的日志）

jenkins/流水线配置/lessie-profile-test-web.conf

@@ -0,0 +1,66 @@
+pipeline {
+    agent any
+
+    parameters {
+        gitParameter(
+            branchFilter: 'origin/(.*)',
+            defaultValue: 'release',
+            name: 'GIT_BRANCH',
+            type: 'PT_BRANCH_TAG',
+            selectedValue: 'DEFAULT',
+            sortMode: 'NONE',
+            description: '选择代码分支: ',
+            quickFilterEnabled: true,
+            tagFilter: '*',
+            listSize: "5"
+        )
+    }
+
+    environment {
+        REMOTE_HOST = '192.168.70.15'
+        REMOTE_PROJECT_PATH = '/data/webapps/lessie-react'
+    }
+
+    stages {
+        stage('Checkout 代码') {
+            steps {
+                git branch: "${params.GIT_BRANCH}", credentialsId: 'fly_gitlab_auth', url: 'http://172.24.16.20/web/lessie-react.git'
+            }
+        }
+
+        stage('同步') {
+            steps {
+                sh """
+                    ssh ${REMOTE_HOST} 'mkdir -p ${REMOTE_PROJECT_PATH}'
+                    rsync -avz --delete --exclude='node_modules' ${WORKSPACE}/ ${REMOTE_HOST}:${REMOTE_PROJECT_PATH}/
+                """
+            }
+        }
+
+        stage('安装启动') {
+            steps {
+                sh """
+                    ssh ${REMOTE_HOST} '
+                        cd ${REMOTE_PROJECT_PATH} &&
+                        pm2 delete lessie-react || true &&
+                        pm2 list &&
+                        nvm use 22.21.1 &&
+                        npm install &&
+                        npm run build &&
+                        pm2 start ecosystem.config.cjs &&
+                        pm2 save
+                    '
+                """
+            }
+        }
+    }
+
+    post {
+        success {
+            echo '部署成功'
+        }
+        failure {
+            echo '部署失败，请检查日志'
+        }
+    }
+}

jenkins/流水线配置/lessie-profile-web.conf

@@ -0,0 +1,93 @@
+pipeline {
+    agent any
+
+    parameters {
+        gitParameter(
+            branchFilter: 'origin/(.*)',
+            defaultValue: 'release',
+            name: 'GIT_BRANCH',
+            type: 'PT_BRANCH_TAG',
+            selectedValue: 'DEFAULT',
+            sortMode: 'NONE',
+            description: '选择代码分支: ',
+            quickFilterEnabled: true,
+            tagFilter: '*',
+            listSize: "5"
+        )
+    }
+
+    environment {
+        REMOTE_HOST = '43.130.56.138'
+        REMOTE_HOST_B = '43.153.21.64'
+        REMOTE_PROJECT_PATH = '/data/webapps/lessie-react'
+    }
+
+    stages {
+        stage('Checkout 代码') {
+            steps {
+                git branch: "${params.GIT_BRANCH}", credentialsId: 'fly_gitlab_auth', url: 'http://172.24.16.20/web/lessie-react.git'
+            }
+        }
+
+        stage('同步A') {
+            steps {
+                sh """
+                    ssh ${REMOTE_HOST} 'mkdir -p ${REMOTE_PROJECT_PATH}'
+                    rsync -avz --delete --exclude='node_modules' ${WORKSPACE}/ ${REMOTE_HOST}:${REMOTE_PROJECT_PATH}/
+                """
+            }
+        }
+
+        stage('安装启动A') {
+            steps {
+                sh """
+                    ssh ${REMOTE_HOST} '
+                        cd ${REMOTE_PROJECT_PATH} &&
+                        pm2 delete lessie-react || true &&
+                        pm2 list &&
+                        nvm use 22.21.1 &&
+                        npm install &&
+                        npm run build &&
+                        pm2 start ecosystem.config.cjs &&
+                        pm2 save
+                    '
+                """
+            }
+        }
+    
+        stage('同步B') {
+            steps {
+                sh """
+                    ssh ${REMOTE_HOST_B} 'mkdir -p ${REMOTE_PROJECT_PATH}'
+                    rsync -avz --delete --exclude='node_modules' ${WORKSPACE}/ ${REMOTE_HOST_B}:${REMOTE_PROJECT_PATH}/
+                """
+            }
+        }
+
+        stage('安装启动B') {
+            steps {
+                sh """
+                    ssh ${REMOTE_HOST_B} '
+                        cd ${REMOTE_PROJECT_PATH} &&
+                        pm2 delete lessie-react || true &&
+                        pm2 list &&
+                        nvm use 22.21.1 &&
+                        npm install &&
+                        npm run build &&
+                        pm2 start ecosystem.config.cjs &&
+                        pm2 save
+                    '
+                """
+            }
+        }
+    }
+
+    post {
+        success {
+            echo '部署成功'
+        }
+        failure {
+            echo '部署失败，请检查日志'
+        }
+    }
+}

nginx/es.jennie.im.conf

@@ -0,0 +1,43 @@
+server {
+    listen 80;
+    server_name es.jennie.im;
+
+    # 强制跳转 HTTPS
+    return 301 https://$host$request_uri;
+}
+
+server {
+    listen 443 ssl;
+    server_name es.jennie.im;
+
+    # 证书
+    ssl_certificate     /data/tengine/conf/certificate/jennie.im.crt;
+    ssl_certificate_key /data/tengine/conf/certificate/jennie.im.key;
+
+    ssl_session_cache shared:SSL:10m;
+    ssl_session_timeout 10m;
+
+    # 推荐安全配置
+    ssl_protocols TLSv1.2 TLSv1.3;
+    ssl_ciphers HIGH:!aNULL:!MD5;
+
+    access_log /data/tengine/logs/es_jennie_im_access.log;
+    error_log  /data/tengine/logs/es_jennie_im_error.log;
+
+    location / {
+        proxy_pass https://10.0.0.38:9200;    # ES 内网地址（HTTPS）
+        
+        # 关闭后端证书校验（必须，否则 Nginx 不认 ES 自签证书）
+        proxy_ssl_verify off;
+
+        proxy_set_header Host $host;
+        proxy_set_header X-Real-IP $remote_addr;
+        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+        proxy_set_header X-Forwarded-Proto https;
+
+        # ES 大响应时需要提高 buffer
+        proxy_buffer_size          16k;
+        proxy_buffers              4 32k;
+        proxy_busy_buffers_size    64k;
+    }
+}

nginx/kibana.jennie.im.conf

@@ -0,0 +1,43 @@
+server {
+    listen 80;
+    server_name kibana.jennie.im;
+
+    # 强制跳转到 HTTPS
+    return 301 https://$host$request_uri;
+}
+
+server {
+    listen 443 ssl;
+    server_name kibana.jennie.im;
+
+    # 公网 HTTPS 证书
+    ssl_certificate     /data/tengine/conf/certificate/jennie.im.crt;
+    ssl_certificate_key /data/tengine/conf/certificate/jennie.im.key;
+
+    ssl_session_cache   shared:SSL:10m;
+    ssl_session_timeout 10m;
+    ssl_protocols       TLSv1.2 TLSv1.3;
+    ssl_ciphers         HIGH:!aNULL:!MD5;
+
+    access_log /data/tengine/logs/kibana_jennie_im_access.log;
+    error_log  /data/tengine/logs/kibana_jennie_im_error.log;
+
+    # Kibana 的反代配置
+    location / {
+        proxy_pass http://10.0.0.38:5601;
+
+        proxy_http_version 1.1;
+        proxy_set_header Connection "keep-alive";
+        proxy_set_header Host $host;
+
+        proxy_set_header X-Real-IP $remote_addr;
+        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+        proxy_set_header X-Forwarded-Proto https;
+        proxy_set_header Upgrade $http_upgrade;
+        proxy_set_header Connection 'upgrade';
+
+        # 防止 WebSocket 断开（Kibana 控制台需要）
+        proxy_read_timeout 300s;
+        proxy_send_timeout 300s;
+    }
+}

nginx/lessie_profile_web.conf

@@ -0,0 +1,69 @@
+upstream profile_backend {
+    server 10.0.0.5:3001;         # 机器A的内网地址
+    server 10.0.0.15:3001;         # 机器B的内网地址
+}
+
+log_format  profile_log  '$remote_addr - $remote_user [$time_local] '
+                          '"$request" $status $body_bytes_sent '
+                          '"$http_referer" "$http_user_agent" '
+                          'upstream_addr=$upstream_addr '
+                          'upstream_status=$upstream_status '
+                          'upstream_response_time=$upstream_response_time '
+                          'request_time=$request_time';
+
+ # 1. 强制 HTTP 转 HTTPS（统一跳转到 https://profile.lessie.ai）
+server {
+    listen 80;
+    server_name profile.lessie.ai;
+    return 301 https://profile.lessie.ai$request_uri;
+}
+
+
+ # 2. 正式服务站点（https://profile.lessie.ai）
+server {
+    listen 443 ssl;
+    server_name profile.lessie.ai;
+
+    ssl_certificate /data/tengine/certificate/lessie.ai.pem;
+    ssl_certificate_key /data/tengine/certificate/lessie.ai.key;
+
+    ssl_protocols TLSv1.2 TLSv1.3;
+    ssl_ciphers HIGH:!aNULL:!MD5;
+
+    access_log /data/tengine/logs/lessie_profile_log.access.log  profile_log;
+    error_log /data/tengine/logs/lessie_profile_log.error.log;
+
+
+    # 反向代理到后端服务器渲染的nxut项目3001端口
+    location / {
+        proxy_pass http://profile_backend;
+        proxy_set_header Host $host;
+        proxy_set_header X-Real-IP $remote_addr;
+    }
+    
+    # 禁止logo走缓存
+    location = /favicon.svg {
+        proxy_pass http://official_backend;
+        proxy_set_header Host $host;
+        proxy_set_header X-Real-IP $remote_addr;
+
+        add_header Cache-Control "no-cache, no-store, must-revalidate" always;
+        add_header Pragma "no-cache" always;
+        add_header Expires 0 always;
+    }
+    # 禁止logo走缓存
+    location = /favicon.ico {
+        proxy_pass http://official_backend;
+        proxy_set_header Host $host;
+        proxy_set_header X-Real-IP $remote_addr;
+
+        add_header Cache-Control "no-cache, no-store, must-revalidate" always;
+        add_header Pragma "no-cache" always;
+        add_header Expires 0 always;
+    }
+}
+
+
+
+
+

nginx/安装.md

@@ -0,0 +1,196 @@
+1、下载安装包：`https://tengine.taobao.org/`
+
+2、上传，安装位置在：`/data/tengine`
+
+3、解压缩：`tar -zxvf tengine-3.1.0.tar.gz`
+
+4、安装编译环境：`yum -y install gcc-c++`
+
+5、安装依赖：`yum -y install pcre-devel zlib zlib-devel openssl openssl-devel`
+
+6、创建安装目录：`mkdir /data/tengine`
+
+7、进入解压好的文件夹：`cd  tengine-3.1.0`
+
+8、执行并指定安装路径：`./configure --prefix=/data/tengine` 、`make`、`make install`
+
+```编译
+./configure --prefix=/data/tengine \
+            --conf-path=/data/tengine/conf/nginx.conf \
+            --error-log-path=/data/tengine/logs/error.log \
+            --http-log-path=/data/tengine/logs/access.log \
+            --pid-path=/data/tengine/logs/nginx.pid \
+            --lock-path=/data/tengine/logs/nginx.lock \
+            --with-http_ssl_module \
+            --with-http_gzip_static_module \
+            --with-pcre \
+            --with-http_stub_status_module
+#解释：
+--prefix=/data/tengine → 指定安装到 /data/tengine/
+--conf-path=/data/tengine/conf/nginx.conf → 指定 nginx.conf 配置文件位置
+--error-log-path=/data/tengine/logs/error.log → 错误日志存放目录
+--http-log-path=/data/tengine/logs/access.log → 访问日志存放目录
+--pid-path=/data/tengine/logs/nginx.pid → 指定 nginx 进程 ID 存放路径
+--lock-path=/data/tengine/logs/nginx.lock → 进程锁文件路径
+--with-http_ssl_module → 开启 HTTPS 支持
+--with-http_gzip_static_module → 开启 Gzip 压缩
+--with-pcre → 支持 正则表达式（用于 Rewrite）
+--with-http_stub_status_module → 启用 Nginx 状态监控
+
+#安装
+make -j$(nproc)
+make install
+
+#=============加上四层代理==============
+./configure --prefix=/data/tengine \
+    --conf-path=/data/tengine/conf/nginx.conf \
+    --error-log-path=/data/tengine/logs/error.log \
+    --http-log-path=/data/tengine/logs/access.log \
+    --pid-path=/data/tengine/logs/nginx.pid \
+    --lock-path=/data/tengine/logs/nginx.lock \
+    --with-http_ssl_module \
+    --with-http_gzip_static_module \
+    --with-pcre \
+    --with-http_stub_status_module \
+    --with-stream
+
+
+
+
+
+
+```
+
+9、查看目录是否安装成功：`ls /data/tengine`
+
+10、启动tengine：`cd /data/tengine/sbin`、`./nginx`
+
+11、添加后续目录
+
+mkdir -p /data/tengine/conf/vhosts
+mkdir -p /data/tengine/conf/certificate
+
+`/data/tengine/conf/nginx.conf` 的 `http {}` 块cc的内添加，引用虚拟主机
+
+http {
+    include       mime.types;
+    default_type  application/octet-stream;
+
+    # 引入虚拟主机配置
+    include /data/tengine/conf/vhosts/*.conf;
+
+    # 其他配置...
+}
+
+
+
+---
+
+/data/tengine/sbin/nginx
+
+/data/tengine/sbin/nginx -s reload
+
+1、启动命令 2、重新加载配置文件命令
+
+
+全局使用nginx
+
+方式一
+
+1. 执行以下命令创建软链接：
+    bash
+
+    ```bash
+    ln -s /data/tengine/sbin/nginx /usr/local/bin/nginx
+    ```
+
+    （`/usr/local/bin` 通常已在系统环境变量 `$PATH` 中，优先选择此目录）
+2. 验证是否生效：
+    bash
+
+    ```bash
+    nginx -v  #
+    ```
+
+
+方式二
+
+1. 编辑环境变量配置文件（以 `bash` 为例）：
+    bash
+
+    ```bash
+    vi /etc/profile  # 全局生效（所有用户），或编辑 ~/.bashrc（当前用户）
+    ```
+2. 在文件末尾添加一行，将 Nginx 所在目录加入 `PATH`：
+    bash
+
+    ```bash
+    export PATH=$PATH:/data/tengine/sbin
+    ```
+3. 使配置立即生效：
+    bash
+
+    ```bash
+    source /etc/profile  # 对应全局配置文件，或 source ~/.bashrc
+    ```
+4. 验证：
+    bash
+
+    ```bash
+    nginx -v  # 直接执行命令测试
+    ```
+
+
+---
+
+配置nginx systemctl
+
+```gitlab
+vim /etc/systemd/system/tengine.service
+[Unit]
+Description=Tengine Web Server
+After=network.target
+
+[Service]
+Type=forking
+PIDFile=/data/tengine/logs/nginx.pid
+ExecStart=/data/tengine/sbin/nginx
+ExecReload=/data/tengine/sbin/nginx -s reload
+ExecStop=/data/tengine/sbin/nginx -s stop
+
+# 防止被 killall/nginx 杀掉
+KillMode=process
+
+# 自动重启（如果你希望 Nginx 意外退出后自动拉起）
+Restart=on-failure
+RestartSec=2s
+
+[Install]
+WantedBy=multi-user.target
+
+```
+
+```gitlab
+检查配置	 使用 nginx -t
+热加载	 使用 systemctl reload tengine
+启动服务	 使用 systemctl start tengine
+停止服务	 使用 systemctl stop tengine
+重启服务	 使用 systemctl restart tengine
+紧急操作	 使用 nginx -s reload/stop
+```
+
+
+
+容器的：
+
+docker exec -it my-nginx nginx -t    # 检查配置文件语法
+docker exec -it my-nginx nginx -s reload  # 重载配置
+
+
+
+
+
+
+
+
+

服务器降配置.sh

@@ -0,0 +1,57 @@
+
+(base) [root@lndj-app-prod-server ~]#ss -ntl
+State       Recv-Q Send-Q                                                                      Local Address:Port                                                                                     Peer Address:Port              
+LISTEN      0      128                                                                                     *:80                                                                                                  *:*                  
+LISTEN      0      128                                                                                     *:18070                                                                                               *:*                  
+LISTEN      0      128                                                                                     *:22                                                                                                  *:*                  
+LISTEN      0      128                                                                                     *:443                                                                                                 *:*                  
+LISTEN      0      128                                                                             127.0.0.1:6789                                                                                                *:*                  
+LISTEN      0      128                                                                             127.0.0.1:6791                                                                                                *:*                  
+LISTEN      0      128                                                                                     *:6379                                                                                                *:*                  
+LISTEN      0      128                                                                                  [::]:22222                                                                                            [::]:*                  
+LISTEN      0      100                                                                                  [::]:8848                                                                                             [::]:*                  
+LISTEN      0      100                                                                                  [::]:8081                                                                                             [::]:*                  
+LISTEN      0      128                                                                                  [::]:20883                                                                                            [::]:*                  
+LISTEN      0      128                                                                                  [::]:9848                                                                                             [::]:*                  
+LISTEN      0      50                                                                                   [::]:12345                                                                                            [::]:*                  
+LISTEN      0      128                                                                                  [::]:9849                                                                                             [::]:*                  
+LISTEN      0      128                                                                                  [::]:8060                                                                                             [::]:*                  
+LISTEN      0      50                                                                                   [::]:44836                                                                                            [::]:*                  
+LISTEN      0      100                                                                                  [::]:4997                                                                                             [::]:*                  
+LISTEN      0      128                                                                                  [::]:9256                                                                                             [::]:*                  
+LISTEN      0      128                                                                                  [::]:7848                                                                                             [::]:*                  
+LISTEN      0      128                                                                                  [::]:9100                                                                                             [::]:* 
+
+
+
+业务进程：
+flymoon_email_prod (CRM)
+flymoon_partner (CRM)
+
+中间件：
+nacos
+redis_server
+ngxin
+
+监控进程：
+node_exporter
+process-exporter
+
+启动命令：
+
+nohup /data/jdk1.8.0_181/bin/java \\
+                            -Dcom.sun.management.jmxremote \\
+                            -Dcom.sun.management.jmxremote.port=12345 \\
+                            -Dcom.sun.management.jmxremote.rmi.port=12345 \\
+                            -Dcom.sun.management.jmxremote.authenticate=false \\
+                            -Dcom.sun.management.jmxremote.ssl=false \\
+                            -Djava.rmi.server.hostname=172.24.16.10 \\
+                            -Xmx8g \\
+                            -XX:+HeapDumpOnOutOfMemoryError \\
+                            -XX:HeapDumpPath=/data/webapps/fly_moon_email_v2/heapdump.hprof \\
+                            -jar /data/webapps/fly_moon_email_v2/fly-moon-email.jar \\
+                            --spring.profiles.active=prod-cn \\
+                            >/dev/null 2>&1 &
+
+nohup /data/jdk-21.0.7/bin/java -jar /data/webapps/fly-moon-partner/flymoon-partner.jar --spring.profiles.active=prod >/dev/null 2>&1 &
+

问IA.md

@@ -341,3 +341,30 @@ Swap:          8.0Gi       3.9Gi       4.1Gi   从工作进程上分析，从内
 3、相比上次查询，哪个子进程没了，哪个子进程出现了
 ====2025-10-01 10:01:00 ====
 
+
+
+k8s 日志采集
+背景：一个项目，有完整的前后端pod，但是有部署多套测试环境。
+比如s1环境、s2环境、s3环境、s4环境、s5环境、s6环境...
+以s1环境为例：总共有如下pod，使用deployment部署。
+s1-flymoon-admin-7cf5fcf447-t7p7n
+s1-flymoon-admin-web-756b79567d-whllw
+s1-flymoon-agent-66485d7b4-mrnqq
+s1-flymoon-email-868c885b79-dvsjc
+s1-flymoon-payment-84f7fdbfcb-94bhl
+s1-lessie-agents-59797c5464-4vwfr
+s1-lessie-ai-web-5c86b8d944-vmv72
+s1-lessie-go-api-774ddc644c-m4cqc
+
+然后s2环境，其中其他flymoon基础付服务使用s1环境的pod，通过svc访问过去
+s2-lessie-agents-69798c5414-1hvfr
+s2-lessie-ai-web-9c8988d914-mrv72
+s2-lessie-go-api-47498c641c-4cpqc
+
+s3~s6环境与s2环境类似，只有各自的：lessie-agents、lessie-ai-web、lessie-go-api
+
+现在我需要采集日志到es中，这个es是k8s外部部署的，怎么采集日志呢？
+daemonSet方式每个node运行一个采集器采集该节点的pod的日志？使用什么采集器？怎么配置？能自动发现pod日志？能处理日志，比如分词？json分词？
+那每个节点上的采集器的pod怎么准确采集呢？比如s1环境的s1-lessie-agents pod，它有多个副本，被调度在不同node上，那么采集器怎么采集到A node的s1-lessie-agents 和 B node的s1-lessie-agents pod的日志到同一个es索引中的呢？
+另外es的索引名称应该如何命名呢？设置生命周期、索引模板、按天or周or月分割索引？
+